Solid Oak Mortice and Tenon Stable Panel Door with Glazed Panel

Standard Specifications

• Door boards 21mm thick
• Stiles and top and bottom rail 42mm thick
• Constructed with mortice and tenon joints
• Character grade oak 
• Unfinished
• Kiln dried Oak
• Overall door thickness 42mm
• Stable Door 50/50 split
• Inward opening, top opens first. 
• Glass not supplied but supplied with glazing beads for the back of the doors unattached to be fitted once the glass is in.
• Marine Plywood panels at the bottom
• Weatherboards pre-fitted 

Options Explained

1. Custom sizes are available, we make everything on site to order at our workshop in Lincolnshire so we specialise in bespoke sizes, any size is possible and there is no extra charge for this service. However larger doors will be costed pro rata. Please contact a member of our team for a bespoke quotation. Any height over 2100mm is charged at an extra 5%. 
2. Door boards are tongue and groove and slot together. These are 21mm thick and include a groove stile and a tongue stile to give you the finished edge. The boards have a V Groove applied but can square edged or Butt & Bead if preferred for no extra charge. Number of boards per door is determined at point of manufacture and is decided by us based on size of the door and timber available at the time (maximum board width 200mm) we can do a specific number of boards but it would need to be specified at point of order, again there is no extra charge for this service.
3. We offer 2 grades of oak - Character Grade and Prime Grade, the differences are briefly described below, please ask for our info sheet if you require more information.
   1. Prime- Minimal knots and colour variation - Tolerance on each face of two intergrown sound knots of 12mm maximum diameter, or this equivalent per linear metre. Slope of grain: almost straight. Not acceptable: sapwood, heart spiral and curly grain deterioration, cross grain, bark pocket, bore holes, warping. Surface checks tolerated. Extra £100 (+VAT)
   2. Character- Colour variation and knots -  Presence on each face of small knots without limitation, and of a maximum of three sound knots per metre, maximum diameter not to exceed one half of the width of the timber or 40mm or equivalent. No extra charge.
4. As standard all doors come unfinished but we can apply a range of exterior coatings if required. Stain Inhibitor base coat extra £50+VAT, inhibitor and uv exterior oil top coat extra £200 +VAT, this cost is for a standard size door and would be calculated pro rata if door is a bespoke size.
5. Weatherboard also available if being used externally which helps stop capillary action underneath the bottom of the door, this is an extra £23.33(+VAT) for standard size door and is calculated pro rata for a bespoke size.
6. It has always been considered good practice not to apply glue to the tongue and groove joints in the boards, this is to allow for natural expansion and contraction. Glue is just applied to fit the ledges and braces and these are then screwed and pelleted onto the boards   
7. All our oak is kiln dried as standard which lowers the moisture content and kills off any woodworm or infestations. We can supply doors in green oak and air dried if preferred- please contact a member of our team for a price.
8. As standard a 50/50 split but can be any ratio required.
9. As standard door is inward opening with the top opening first but this can be altered if required.